Maintenance display
#
Remove protective film
1
from the mainte‐
nance display on the tip of the newly fitted
wiper blades.
If the colour of the maintenance display changes
from black to yellow, the wiper blades should be
replaced.
%
The duration until the colour changes varies
depending on the usage conditions.
Changing the rear window wiper blade
&
WARNING Risk of becoming trapped if
the windscreen wipers are switched on
while wiper blades are being replaced
If the windscreen wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
#
Always switch off the windscreen wip‐
ers and ignition before changing the
wiper blades.
*
NOTE Damage to the rear window
If the wiper arm falls onto the rear window
without the wiper blade attached, this may
damage the rear window.
#
Securely hold the wiper arm while
changing the wiper blade or carefully
lower it onto the rear window.
Removing the wiper blade
#
Switch off the ignition (
/
page 141).
#
Within approximately 15 seconds, turn the
combination switch to position
1
(
/
page 125).
The wiper arm moves into the change posi‐
tion.
Light and sight 127
Summary of Contents for G-Class 2018
