Mercedes-Benz EQS 350, Operator'S Manual

Page: 454 / 581

#
Have the brake fluid renewed at the
specified intervals.
Have the brake fluid regularly replaced at a quali-
fied specialist workshop.
Only use a brake fluid approved by Mercedes-
Benz according to MB-Freigabe or MB-Approval
331.0.
Coolant
Notes on coolant
Observe the notes on operating fluids
(
/
page 450).
&
WARNING Risk of fire‑ and injury from
antifreeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite.
#
Allow the drive system to cool down
before you top up the antifreeze.
#
Make sure that no antifreeze spills out
next to the filler opening.
#
Thoroughly clean the antifreeze from
component parts before starting the
vehicle.
*
NOTE Damage caused by incorrect cool-
ant
#
Only use coolant that has been premixed
with the required antifreeze protection.
Information on coolant is available at the fol-
lowing locations:
R
In the Mercedes-Benz Specification for
Operating Fluids 320.1
-
At https://bevo.mercedes-benz.com
-
In the Mercedes-Benz BeVo App
R
At a qualified specialist workshop
*
NOTE Overheating at high outside temper-
atures
If an inappropriate coolant is used, the cooling
system is not sufficiently protected against
overheating and corrosion at high outside
temperatures.
#
Only use coolant approved for
Mercedes-Benz.
#
Observe the instructions in the
Mercedes-Benz Specifications for Oper-
ating Fluids 320.1.
Have the coolant regularly replaced at a qualified
specialist workshop.
Proportion of antifreeze concentrate in the cool-
ing system:
R
A minimum of 50% (antifreeze protection down
to about -37°C)
R
A maximum of 55% (antifreeze protection
down to -45°C)
Notes on windscreen washer fluid
Observe the notes on operating fluids
(
/
page 450).
Technical data 451