#
Press the DYNAMIC SELECT button
1
on the
left or right.
The drive program selected appears on the
driver's display.
Configuring DYNAMIC SELECT (multimedia sys-
Multimedia system:
4
©
5
Settings
5
Vehicle
5
DYNAMIC SELECT
Setting drive program I
#
Select
=
Individual
.
#
Select and set a category.
Switching the reset display on/off
#
Activate or deactivate
Ask when starting
.
%
This function must be activated for each user
profile separately. The drive program for the
respective user profile of the last driver is only
stored if this function is activated.
Function on: the next time the vehicle is started a
prompt appears asking whether the last active
drive program should be restored.
%
The prompt only appears if the previously
active settings deviate from the standard set-
tings.
Function off: the next time the vehicle is started
the
A
drive program is set automatically.
Multimedia system:
4
©
5
Info
#
Select
Vehicle
.
The vehicle data is displayed.
Calling up the fuel consumption indicator
Multimedia system:
4
©
5
EQ
#
Select
Consumption
.
The current and average fuel consumption will
be displayed.
208 Driving and parking
Summary of Contents for EQS 350
