The ASSYST PLUS service interval display is only
an aid. It is the responsibility of the driver of the
vehicle to have maintenance work carried out
more often than prescribed due to actual operat-
ing conditions and/or stresses.
The ASSYST PLUS service interval display can cal-
culate the service due date only when the battery
is connected.
#
Display and note down the service due date
on the driver display before disconnecting the
battery (
/
page 398).
Notes about Maintenance Management
If the Maintenance Management service is activa-
ted, relevant data is automatically transferred to
the Mercedes-Benz customer centre.
The customer centre transmits the data to the
service partner that you have entered on the
Mercedes me website at: http://
www.mercedes.me. You will then receive individ-
ual recommendations regarding the maintenance
of your vehicle.
%
The calculation of the optimal transmission
time of the maintenance request to the
service partner is subject to technical limita-
tions that may cause the maintenance recom-
mendation to be perceived as too early or too
late or not to be made at all. In this case, you
can conveniently arrange a maintenance
appointment with the customer centre via the
maintenance reminder in the multimedia sys-
tem.
%
Maintenance Management and the mainte-
nance reminder in the multimedia system are
not available in every country. Contact a
Mercedes-Benz service centre to find out
whether this function is available in your coun-
try.
Data transferred when using Maintenance Man-
When the service is activated, relevant data is
automatically transferred to determine the
required scope of maintenance as well as fault
detection and fault rectification. Details on data
transfer can be found in the data protection infor-
mation for the Mercedes me connect services.
These can be found at: http://www.mercedes.me
under "My Mercedes me account", "Terms of use".
%
Maintenance Management and the mainte-
nance reminder in the multimedia system are
not available in every country.
%
This service is not available in all countries.
The vehicle can detect if certain wear parts need
to be replaced or if malfunctions have occurred in
vehicle systems. If the Telediagnostics service is
activated, relevant data is automatically transmit-
ted to the manufacturer. If fault conditions are
detected by the vehicle system self-diagnosis, the
system transmits recommendations for action to
the Mercedes-Benz customer centre depending
on the fault detected. The customer centre trans-
mits the data to the service partner that you have
Maintenance and care 399
Summary of Contents for EQS 350
