Mercedes-Benz EQS 350, Operator'S Manual

Page: 444 / 581

#
Take the ratchet out of the tyre-change tool kit
and place it on the hexagon nut of the jack so
that the letters "AUF" are visible.
#
Position support 2 of jack 4 on jack sup-
port point 1 .
#
Turn ratchet 3 clockwise until support 2
sits completely on jack support point 1 and
the base of the jack lies evenly on the ground.
#
Turn ratchet
3
until the tyre is raised a maxi-
mum of 3 cm from the ground.
#
Loosen and remove the wheel (
/
page 441).
Removing a wheel
Requirements:
R
The vehicle is raised.
* NOTE Mercedes-AMG vehicles
#
Observe the notes in the Supplement.
You could otherwise fail to recognise
dangers.
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level of
comfort when braking.
* NOTE Damage to the wheels' plastic ele-
ments when changing a wheel
Plastic elements on wheels may be damaged
when removing and repositioning the wheel.
#
Do not raise the wheels by the plastic
elements when removing and reposition-
ing.
*
NOTE Damage to threading from dirt on
wheel bolts
#
Do not place wheel bolts in sand or on a
dirty surface.
#
Unscrew the uppermost wheel bolt com-
pletely.
Wheels and tyres 441