Multi-stage transfer depends on the following fac-
tors:
R
Reason for the initiation of the call
R
The available mobile phone transmission tech-
nology.
R
The activated Mercedes me connect services.
R
The service selected in the voice control sys-
tem.
%
A prompt for consent to the data transfer only
occurs if the corresponding Mercedes me
connect service is not activated.
%
The scope of the data transmitted depends on
the vehicle model and equipment. For techni-
cal reasons, not all data is available at all
times.
Data transfer if Mercedes me connect services
are not activated
If no Mercedes me connect services are activated
and the data protection prompt has been con-
firmed the following data is transmitted:
R
Vehicle identification number
R
Time of the call
R
Reason for the initiation of the call
R
Confirmation of the data protection prompt
R
Country indicator of the vehicle
R
Set language for the multimedia system
R
Telephone number of the communication plat-
form installed in the vehicle
If a call is made for a service appointment via the
service reminder, the following data is also trans-
mitted:
R
Current mileage and maintenance data
If a call is made after automatic accident or break-
down detection using the multimedia system, the
following data is also transmitted:
R
Current mileage and maintenance data
R
Current vehicle location
If Accident and Breakdown Management is called
via the voice control system and no service has
been activated, but the data protection query has
been confirmed, the following data can also be
called up from the vehicle by the Mercedes-Benz
Customer Centre:
R
Current vehicle location
If the data protection prompt has been rejected,
the following data is transmitted to enable targe-
ted advice and an efficient service:
R
Reason for the initiation of the call
R
Rejection of the data protection prompt
R
Country indicator of the vehicle
R
Set language for the multimedia system
R
Telephone number of the communication plat-
form installed in the vehicle
Data transfer if Mercedes me connect services
are activated
Only if the respective service is activated will
additional incident-specific data be transmitted in
the second stage to enable an optimal service.
378 MBUX multimedia system
Summary of Contents for EQS 350
