Mercedes-Benz EQE 350+, Owner'S Manual

Page: 213 / 541

AAut utomatic rev omatic rever ersing function of t sing function of the electr he electric ic
socke sockett ap ap
If an obstacle impedes the electric socket ap
during the closing process, the socket ap opens
again automatically and the driver's display shows
a corresponding display message. The automatic
reversing function is only an aid and is not a sub-
stitute for your attentiveness.
#
When closing the socket ap, make sure that
no body parts or objects are in the closing
area.
FFunction of t unction of the c he charg harge lev e level displa el display in t y in the dr he driviver's er's
display display
%
The data shown in the illustration is example
data.
1
Range at current charge level
2 Current state of charge of the high-voltage
battery
3 Maximum state of charge (depending on the
setting)
4
Time remaining until completely charged (until
the selected maximum charge level is
reached)
5
Charge level recommended by Range Assis-
tant to reach the next destination
6
Dynamic charge level display
7 Current charging capacity
%
Speci ed remaining range 1 may vary due to
di erent factors, e.g. driving style or topogra-
phy.
When the vehicle is connected to the mains sup-
ply and is switched o , the driver's display shows
the charge level display for approximately two
minutes.
%
The value of current charging capacity 7 can
di er from the display on the charging station.
At a charging capacity of 10 kW or higher, the
value in the charge level display is rounded o
and shown without a decimal place.
The value in 4 varies depending on the setting of
the charging process. It displays the charging pre-
diction, e.g. the time at which the selected charge
level will be reached or the charge level at the
pre-selected departure time.
210 210 Driving and parking