Mercedes-Benz EQE 350+, Owner'S Manual

Page: 421 / 541

#
Have the brake uid renewed at the
speci ed intervals.
Have the brake uid regularly replaced at a quali-
ed specialist workshop.
Only use a brake uid approved by Mercedes-
Benz according to MB-Freigabe or MB-Approval
331.0.
Coolant Coolant
NNoottes on coolant es on coolant
Observe the notes on operating uids
(
/
page 417).
&
W WARNING ARNING Risk of re‑ and injury from
antifreeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite.
#
Allow the drive system to cool down
before you top up the antifreeze.
#
Make sure that no antifreeze spills out
next to the ller opening.
#
Thoroughly clean the antifreeze from
component parts before starting the
vehicle.
* NNOOTE TE Damage caused by incorrect cool-
ant
#
Only use coolant that has been premixed
with the required antifreeze protection.
Information on coolant is available at the fol-
lowing locations:
R
In the Mercedes-Benz Speci cation for
Operating Fluids 320.1
-
At https://bevo.mercedes-benz.com
-
In the Mercedes-Benz BeVo App
R
At a quali ed specialist workshop
* NNOOTE TE Overheating at high outside temper-
atures
If an inappropriate coolant is used, the engine
cooling system is not su ciently protected
against overheating and corrosion at high out-
side temperatures.
#
Only use coolant approved for
Mercedes-Benz.
#
Observe the instructions in the
Mercedes-Benz Speci cations for Oper-
ating Fluids 320.1.
Have the coolant regularly replaced at a quali ed
specialist workshop.
Proportion of antifreeze concentrate in the engine
cooling system:
R
A minimum of 50% (antifreeze protection down
to about -37°C)
R
A maximum of 55% (antifreeze protection
down to -45°C)
NNoottes on windscr es on windscreen w een washer asher uid uid
Observe the notes on operating uids
(
/
page 417).
418 418 Technical data