R
The swivel range is clear.
R
The trailer cables or adapter plugs have been
removed.
FFolding t
olding the ball nec
he ball neck out
k out
#
Pull switch
2
until the ball neck unlocks.
The ball neck will fold out from under the rear
bumper.
Indicator lamp
1
will ash.
#
Pull the ball neck in the direction of the arrow
until it engages audibly in a vertical position.
Indicator lamp
1
on the ball neck release
switch will go out.
If the ball neck is not securely locked in place,
the
Check trailer hitch lock
message will
appear on the driver display.
#
Remove the cover cap from the ball head and
store it in a safe place.
Make sure that the ball on the ball neck is clean.
Check that it is either greased or dry (grease-
free), depending on the instructions for the trailer.
FFolding t
olding the ball nec
he ball neck in
k in
#
Pull switch
2
until the ball neck unlocks.
The ball neck will fold up under the rear
bumper.
Indicator lamp
1
will ash.
#
Push the ball neck in the direction of the
arrow until it engages audibly behind the
bumper.
Indicator lamp
1
will go out and the message
on the driver display will disappear.
Observe the information about the displays on the
driver's display:
R
Indicator and warning lamps (
/
page 489)
R
Display messages (
/
page 424)
292
292 Driving and parking
Summary of Contents for EQE 350+
