Displa
Display messag
y messages
P
es
Possible causes/conseq
ossible causes/consequences and
uences and
M
M
Solutions
Solutions
¢
Max. speed 20km/h
* AIRMATIC is functioning only to a limited extent. The vehicle's handling characteristics may be a ected.
#
The current level is too high. Do not drive at speeds greater than 20 km/h.
#
Consult a quali ed specialist workshop.
É
STOP Vehicle level too low
* You have pulled away despite the vehicle level being too low.
#
Stop the vehicle in accordance with the tra c conditions.
The vehicle will be raised to the selected vehicle level.
#
Wait until the display message disappears before pulling away.
If the display message does not disappear and a warning tone also sounds, AIRMATIC is malfunctioning:
#
do not drive at speeds greater than 80 km/h and consult a quali ed specialist workshop immediately.
*
NNOOTE
TE The tyres on the front axle or the fenders could be damaged by large steering movements
#
Avoid large steering movements while driving and listen for scraping sounds.
#
If you hear scraping sounds, pull over and stop the vehicle in accordance with the tra c conditions, and set a
higher vehicle level if possible.
#
Set a higher vehicle level (
/
page 262).
Depending on the malfunction, the vehicle will be raised.
Display messages and warning/indicator lamps 477
477
Summary of Contents for EQE 350+
