Mercedes-Benz EQE 350+, Owner'S Manual

Page: 338 / 541

Se Setting t tting the st he stat ate of c e of charg harge of t e of the high-v he high-volt oltag age bat- e bat-
tter ery when t y when the c he char harging st ging station and des ation and destination tination
ar are r e reac eached hed
#
Select Z in the navigation module
(
/
page 330).
#
Select Route .
#
Select Charge level at destination or Charge
level at charging stations .
#
Move the control knob to the le or right and
set the preferred state of charge in percent
(%).
The destination or charging station along the
route is reached with the set state of charge.
To reach a charging station, the system uses the
battery capacity, e.g. up to 10 % residual energy
content (state of charge). You can increase this
state of charge on arrival at the charging station
and destination, e.g. to 25 % at the charging sta-
tion and 50 % at the destination.
%
In the event of increased energy consumption
while driving, e.g. with headwind, the following
options are available on the system side:
R
The charging station is safely reached
even at states of charge of less than 10 %.
R
Navigation with Electric Intelligence
selects a closer charging station for the
route.
%
If a charging facility is available at the destina-
tion, the state of charge can be lowered below
10 %. The Min. message appears on the cen-
tral display. Make sure that the range monitor
is switched on.
Selecting a pro Selecting a provider f vider for c or char harging st ging stations ations
#
Select Z in the navigation module
(
/
page 330).
#
Select Route .
#
Activate or deactivate Mercedes me Charge .
If the option is activated, only charging sta-
tions payable with Mercedes me Charge are
taken into account when selecting the charg-
ing station.
or
#
Activate All .
All charging stations known to the navigation
system are taken into account when calculat-
ing routes with Electric Intelligence, regardless
of the type of payment.
It may be necessary to register with the pro-
vider.
Switc Switching t hing the r he rang ange monit e monitor on or or on or oo
The activated range monitoring assists with mes-
sages on the driver and central display to ensure
safe arrival at the destination.
#
Select Z in the navigation module
(
/
page 330).
#
Select Route .
#
Activate or deactivate Range monitoring .
To reach the destination with the state of
charge set by the driver, the range is perma-
nently monitored when the option is switched
on.
% This function is not available in all countries.
MBUX multimedia system 335 335