Mercedes-Benz E-Class 2010, Owner'S Manual

Page: 89 / 333

Removing
Bolts on the AIRCAP draught stop between the
head restraints in the rear compartment
X
Use the 4 mm hex-socket wrench to turn
the bolts on both sides anti-clockwise by
about 90° and loosen them.
X
Pull the bolts out of the brackets on the
head restraints.
X
Pull the AIRCAP draught stop out of the
guide rails in the direction of the arrow.
Make sure that you pull the AIRCAP draught
stop forwards slightly when doing so.
Fitting
X
Keeping the AIRCAP draught stop horizon-
tal, guide it into the slot between the head
restraints in the direction of the arrow with
both racks straight down.
X
Push the AIRCAP draught stop down until
the bolts are at the same height as the
brackets on the head restraints.
X
Insert the bolts into the brackets on both
sides.
X
Tighten the bolts with the 4 mm hex-socket
wrench until they engage.
The markings on the bolts are vertical.
86
Soft top (Cabriolet)
Open
in
ga
nd
closing
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11
2010-01-26T13:03:22+01:00 - Seite 86