X
To unlock: press button
:
.
X
To lock: press button
;
.
Automatic locking feature
i
The vehicle is locked automatically when
the ignition is switched on and the wheels
begin to turn. There is a risk of being locked
out when the vehicle is being pushed or
tested on a dynamometer.
X
To deactivate: press and hold button
:
for about five seconds until a tone sounds.
X
To activate: press and hold button
;
for
about five seconds until a tone sounds.
You can switch the automatic locking func-
tion on and off using the on-board computer
(
Y
page 208).
Unlocking the driver's door (emer-
gency key element)
If the vehicle can no longer be unlocked cen-
trally with the key or KEYLESS-GO:
X
Take the emergency key element out of the
key (
Y
page 67).
X
Insert the emergency key element into the
lock of the driver's door as far as it will go.
X
Turn the emergency key element anti-
clockwise to position
1
.
The door is unlocked.
i
On right-hand-drive vehicles, turn the
emergency key element clockwise.
X
Turn the emergency key element back and
remove it.
Locking the vehicle (emergency key
element)
Emergency locking
X
Open the driver's door.
X
Close the front-passenger door and the
boot lid.
X
Press the locking button (
Y
page 70).
X
Make sure that the locking knob on the
front-passenger door is still visible. Press
down the locking knob by hand, if neces-
sary.
X
Close the driver's door.
X
Take the emergency key element out of the
key (
Y
page 67).
Doors
71
Open
in
ga
nd
closing
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa
Version: 3.0.2.11
2010-01-26T13:03:22+01:00 - Seite 71
Z
Summary of Contents for E-Class 2010
