Mercedes-Benz E-Class 2010 Owner'S Manual Download

Page: 267 / 333

this reason, following a car wash, drive with

particular care until the brakes are dry.

Risk of accident

The vehicle is braked when the HOLD function

or DISTRONIC PLUS is activated. Therefore,

deactivate the HOLD function and DISTRONIC

PLUS before the vehicle is washed in an auto-

matic car wash.

You can wash the vehicle in an automatic car

wash from the very start.

We recommend automatic car washes

with an adjustable

high-pressure pre-

cleaning program. In car washes that use

high water pressures, there is a danger that

a small quantity of water may leak into the

vehicle.

Cabriolet: do not treat the vehicle with

hot wax under any circumstances.

Cabriolet: pull the key out of the ignition

lock when washing the vehicle. This

ensures that the wind deflector on the

windscreen is retracted. The wind deflector

may otherwise be damaged.

If the vehicle is very dirty, pre-wash it before

cleaning it in an automatic car wash.

In car washes with a towing mechanism,

make sure that the automatic transmission

is in transmission position N, otherwise the

vehicle could be damaged.

Make sure that the side windows are com-

pletely closed, that the ventilation/heater

blower is fully turned off and that the wind-

screen wiper switch is set to 0. Otherwise,

the rain/light sensor may be activated, trig-

gering unintended wiper movements. This

could cause damage to the vehicle.

After using an automatic car wash, wipe off

wax from the windscreen and the wiper

blades. This will prevent smears and reduce

wiping noises caused by residue on the wind-

screen.

High-pressure cleaners

Risk of accident

Do not use high-pressure cleaners with circu-

lar-jet nozzles (dirt grinders) to clean your

vehicle, in particular the tyres. You could oth-

erwise damage the tyres and cause an acci-

dent.

Always maintain a distance of at least

30 cm between the vehicle and the high-

pressure cleaner nozzle. Information about

the correct distance is available from the

equipment manufacturer.
Move the high-pressure cleaner nozzle

around when cleaning your vehicle.
Do not aim directly at any of the following:

tyres

door joint

soft top (Cabriolet)

wind deflector net (Cabriolet)

electrical components

battery

connectors

lights

seals

trim elements

ventilation slots

Damaged seals or electrical components

can lead to leaks or failures.

Cleaning the wheels

Do not use acidic wheel cleaning products

to remove brake dust. This could damage

wheel bolts and brake components.

Do not park up the vehicle for an extended

period straight after cleaning it, particularly

after having cleaned the wheels with wheel

cleaner. Wheel cleaners could cause

increased corrosion of the brake discs and

brake pads/linings. For this reason, you

should drive for a few minutes after clean-

ing. Braking heats the brake discs and

In accordance with the specifications for Cabriolet programs.

264

Care

Maintenance

and

care

BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB

mkalafa

Version: 3.0.2.11

2010-01-26T13:03:22+01:00 - Seite 264

Summary of Contents for E-Class 2010














































































































































































































































































































































Search results

Summary of Contents for E-Class 2010

Reviews:

Related manuals for E-Class 2010

Brands by name

Popular brands

Mercedes-Benz E-Class 2010, Owner'S Manual

Search results

Summary of Contents for E-Class 2010

Reviews:

Related manuals for E-Class 2010

Brands by name

Popular brands