I
To open
J
To lock
X
Pull off the cover of the roof lock behind the
overhead control panel.
X
Insert the hex-socket wrench into the roof
lock.
X
Turn the hex-socket wrench clockwise
I
as far as possible.
!
Make sure the hex-socket wrench is
turned anti-clockwise as far as possible
during the following step. The soft top may
otherwise not be fully locked.
X
Turn the hex-socket wrench anti-clockwise
J
as far as possible.
The soft top is now pre-locked on the wind-
screen frame.
X
Move material tensioning frame
K
to an
upright position.
!
Make sure the soft-top compartment
cover does not collide with the material
tensioning frame during the following step.
X
Lower soft-top compartment cover
L
.
X
With your hand flat, press down the mate-
rial tensioning frame until it rests on soft-
top support
M
of the soft-top compart-
ment cover.
G
Risk of injury
You could trap your hands.
Do not push the soft-top compartment cover
forwards in front of the soft-top support with
your hands.
X
With your hand flat, press the soft-top com-
partment cover forwards/downwards on
both sides simultaneously until it engages
in the guide. Apply your hands to the points
indicated with arrows.
At the same time, press the material ten-
sioning frame gently downwards with your
flat hand.
82
Soft top (Cabriolet)
Open
ing
and
clo
sin
g
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa
Version: 3.0.2.11
2010-01-26T13:03:22+01:00 - Seite 82
Summary of Contents for E-Class 2010
