Mercedes-Benz E-Class 2010, Owner'S Manual

Page: 318 / 333

Engine oil
Note the following
The quality of engine oils is decisive for the
function and service life of an engine. After
extensive tests, Mercedes-Benz approves
engine oils which correspond to the current
technical standard.
Therefore, only Mercedes-Benz approved
engine oils may be used in Mercedes-Benz
engines.
Further information on tested and approved
engine oils can be obtained from any
Mercedes-Benz Service Centre. We recom-
mend having the oil change performed at a
Mercedes-Benz Service Centre. Mercedes-
Benz approval is indicated on the oil container
by the inscription "MB Approval" and the cor-
responding designation, e.g. MB Approval
229.51.
The table shows which engines oil have been
approved for your vehicle.
Petrol engines MB Approval
E 350
58
E 350 CGI
59
E 500
229.3, 229.5
E 200 CGI
59
E 250 CGI
59
229.3, 229.5,
229.51
Diesel engines MB Approval
Vehicles with a diesel particle filter
E 220 CDI
59
E 250 CDI
59
E 350 CDI
59
228.51,
229.31, 229.51
You can call up an overview of approved
engine oils on the Internet at
http://bevo.mercedes-benz.com by enter-
ing the designation, e.g. 229.5.
i
If the engine oils listed in the table are not
available, you may add a maximum of 1.0 l
of the following engine oils, once only, until
the next oil change:
R
vehicles with a petrol engine: MB
Approval 229.1 or ACEA A3
R
vehicles with a diesel engine: MB
Approval 229.1 or ACEA C3
Capacities
The following values refer to an oil change
including the oil filter.
58
Only for certain countries.
59 BlueEFFICIENCY
Service products and capacities
315
Techni
cal
dat
a
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11
2010-01-26T13:03:22+01:00 - Seite 315
Z