Mercedes-Benz E-Class 2010 Owner'S Manual Download

Page: 174 / 333

Storing the current speed
You can use the cruise control lever to limit

the speed to any speed above 30 km/h while

the engine is running.

Briefly press the cruise control lever

or down

to the pressure point.

The current speed is stored and shown in

the multifunction display.
The segments in the multifunction display

light up from the start of the scale up to the

stored speed.

Storing the current speed or calling up the

last stored speed

Risk of accident

Only select a stored speed if you know what

that speed is and whether it is suitable for the

current driving and traffic situation. Other-

wise, sudden braking could endanger you or

others.

Briefly pull the cruise control lever towards

you

Making adjustments in 10 km/h incre-

ments

Briefly press the cruise control lever

beyond the pressure point, up

for a

higher speed or down

for a lower speed.

Keep the cruise control lever pressed

beyond the pressure point until the desired

speed is set. Press the cruise control lever

for a higher speed or down

for a

lower speed.

Making adjustments in 1 km/h incre-

ments

Briefly press the cruise control lever to the

pressure point, up

for a higher speed or

down

for a lower speed.

Keep the cruise control lever pressed to the

pressure point until the desired speed is

set. Press the cruise control lever up

for

a higher speed or down

for a lower

speed.

Deactivating variable SPEEDTRONIC
There are several ways to deactivate variable

SPEEDTRONIC:

Briefly press the cruise control lever for-

wards

Briefly press the cruise control lever in the

direction of arrow

LIM indicator lamp

;

in the cruise control

lever goes out. Variable SPEEDTRONIC is

deactivated.
Cruise control or DISTRONIC PLUS is selec-

ted.

Variable SPEEDTRONIC is automatically

deactivated:

when you depress the accelerator pedal

beyond the pressure point (kickdown), but

only if your current speed does not differ by

more than 20 km/h from the stored speed.

You will hear a warning tone if this is the

case.

on vehicles with manual transmission, if

you shift to a higher gear and as a result the

engine speed is too low.

Risk of accident

It is not possible to deactivate variable Speed-

tronic by braking.

The last speed stored is cleared when you

switch off the engine.

Permanent SPEEDTRONIC

Permanent SPEEDTRONIC is only availa-

ble for certain countries.

You can use the on-board computer to limit

the speed permanently to a value between

160 km/h (e.g. for driving on winter tyres)

and the maximum speed (

page 207).

Shortly before the stored speed is reached, it

appears in the multifunction display.

Driving systems

171

Driving

and

ing

BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB

mkalafa

Version: 3.0.2.11

2010-01-26T13:03:22+01:00 - Seite 171

Summary of Contents for E-Class 2010














































































































































































































































































































































Search results

Summary of Contents for E-Class 2010

Reviews:

Related manuals for E-Class 2010

Brands by name

Popular brands

Mercedes-Benz E-Class 2010, Owner'S Manual

Search results

Summary of Contents for E-Class 2010

Reviews:

Related manuals for E-Class 2010

Brands by name

Popular brands