Flat tyre
321
G
Risk of accident
If the tyre pressure is now lower than
1.3 bar, the tyre is too badly damaged. Do
not drive any further. Consult a qualified
specialist workshop which has the neces-
sary specialist knowledge and tools to carry
out the work required. Mercedes-Benz rec-
ommends that you use a Mercedes-Benz
Service Centre for this purpose. In particu-
lar, work relevant to safety or on safety-
related systems must be carried out at a
qualified specialist workshop.
X
If the tyre pressure is still at least 1.3 bar,
correct it (see fuel filler flap for values).
To increase the tyre pressure: switch on
the electric air pump.
To reduce the tyre pressure: open pres-
sure release screw
a
on pressure
gauge
b
.
X
Drive to the nearest workshop and have the
tyre changed there.
X
Have the TIREFIT kit replaced as soon as
possible at a qualified specialist workshop,
e.g. at a Mercedes-Benz Service Centre.
G
Risk of accident
Do not exceed the maximum speed of 80
km/h.
The “max. 80 km/h” sticker must be affixed
within the driver's field of vision.
The vehicle's handling characteristics may
be affected.
H
Environmental note
Have the used TIREFIT kit disposed of pro-
fessionally, e.g. at a Mercedes-Benz
Service Centre.
X
Have the TIREFIT kit replaced every four
years at a qualified specialist workshop,
e.g. a Mercedes-Benz Service Centre.
Version 2
1
TIREFIT sealant filler bottle
2
Recess
3
On/off switch
4
Electric connector with cable
5
Air pump hose
6
Flange
X
Pull connector with cable
4
and air pump
hose
5
from the housing.
X
Screw air pump hose
5
onto flange
6
of
TIREFIT filler bottle
1
.
X
Place TIREFIT sealant filler bottle
1
head
downwards into recess
2
of the electric
air pump.
Practical advice
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 321
Z
Dateiname: 6515_3416_02_buchblock.pdf;
preflight
