Loading and stowing
194
Removing the rear luggage compartment
floor
1
To raise
2
Rear luggage compartment floor
3
Retainer
4
To extend
5
Pneumatic spring
6
Release catch
X
Open rear luggage compartment floor
2
(
Y
page 193).
X
Slide release catch
6
upwards and
remove pneumatic spring
5
from the bolt
towards the left.
X
Press pneumatic spring
5
into retainer
3
.
X
Fold rear luggage compartment floor
2
upwards to an almost vertical position (an
angle of 85°).
i
Rear luggage compartment floor
2
can
only be extended out of the left-hand pin at
an angle of 85°.
X
Grasp the top of rear luggage compartment
floor
2
, raise it on left-hand side
1
and
extend it towards the left out of right-hand
pin
4
.
Extending the luggage compartment floor
X
Remove the rear luggage compartment
floor (
Y
page 194).
X
Open the front luggage compartment floor
(
Y
page 193).
1
Front luggage compartment floor
2
Loading tray
3
Folding box
4
Transverse brace
5
Release catch
X
Remove loading tray
2
.
X
Slide release catch
5
as far as it will go to
the right and press transverse brace
4
upwards on the left-hand side.
X
Disconnect and remove transverse brace
4
towards the left out of the guide.
1
Front luggage compartment floor
4
Transverse brace
6
Retainer
X
Remove transverse brace
4
. To do this,
insert transverse brace
4
into two retain-
Controls
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 194
Dateiname: 6515_3416_02_buchblock.pdf;
preflight