On-board computer
132
Resetting to factory settings
For safety reasons, not all functions are reset:
permanent Speedtronic can only be set in the
Vehicle
menu. The
Headlamp mode
function
in the
Lighting
submenu is only reset if the
vehicle is stationary.
X
Press the
è
or
·
button to select the
Settings...
menu.
X
Press and hold the reset button on the left-
hand side of the instrument cluster for
approximately three seconds.
A prompt appears in the multi-function dis-
play asking you to press the reset button
again to confirm.
X
Press the reset button again.
The functions of most submenus are
restored to the factory settings.
or
X
If you want to retain the settings, do not
press the reset button a second time.
After approximately 5 seconds, the
Set-
tings...
menu appears again.
Submenus in the Settings menu
X
Press
è
or
·
to select the
Set-
tings...
menu.
X
Press the
j
button to call up the selec-
tion of submenus.
You will see the selection of submenus.
There are more submenus available than
simultaneously displayed.
X
Press the
æ
or
ç
button to select a
submenu.
The selected submenu is highlighted.
X
Press the
j
button to select a function
within a submenu.
X
Press the
æ
or
ç
button to change
the setting.
The changed setting is stored.
X
Press the
è
or
ÿ
button to select a
different display.
The following tables show the settings you
can make in the individual submenus. You will
find additional information on the pages
shown.
Instrument cluster submenu
R
Unit of measurement for distance
(
Y
page 133)
R
Language (
Y
page 133)
R
Status line display (
Y
page 134)
R
Basic display (
Y
page 134)
Time/date submenu
22
R
Setting the date and time (
Y
page 134)
22
This function is not available on vehicles with Audio 50 APS* or COMAND APS*.
Controls
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 132
Dateiname: 6515_3416_02_buchblock.pdf;
preflight