Where will I find...?
254
Vehicle tool kit, jack and spare
wheel*
The vehicle tool kit is located in a stowage
compartment underneath the floor of the
boot/luggage compartment.
G
Risk of injury
The jack is designed only to raise and hold
the vehicle for a short time while a wheel
is being changed.
If you are carrying out work on the vehicle,
you must use stands.
Make sure that the jack is placed on a firm,
non-slip and level surface. Do not use
wooden blocks or similar objects as a jack
underlay. Otherwise, the jack will not be
able to achieve its load-bearing capacity
due to the restricted height.
Do not start the engine at any time while a
wheel is being changed.
Do not lie under the vehicle when it is being
supported by the jack. If you do not raise
the vehicle as described, it could slip off the
jack (e.g. if the engine is started or a door
or the boot lid/tailgate is opened or closed)
and you could be seriously injured.
i
When using the jack, you should also
observe the safety notes in the "Flat tyre"
section (
Y
page 324).
Saloon
X
Fold up the boot floor (
Y
page 192).
Estate
X
Open the luggage compartment floor
(
Y
page 193).
Vehicles with folding bench seat*
X
Open the luggage compartment floor
(
Y
page 193).
i
To reach the vehicle tool kit, the side
cover must first be released.
1
Rotary catch
2
Cover
X
Turn rotary catch
1
clockwise to the stop
and remove cover
2
.
Practical advice
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 254
Dateiname: 6515_3416_02_buchblock.pdf;
preflight
