Sliding sunroof
185
To open the roller sunblinds fully, proceed as
follows:
X
Pull the switch on the front overhead con-
trol panel beyond the pressure point in the
direction of arrow
1
.
or
X
Press the switch on the rear overhead con-
trol panel beyond the pressure point in the
direction of arrow
2
.
X
To stop: press or pull one of the switches
in any direction.
Closing
X
Press the switch on the front overhead con-
trol panel in the direction of arrow
2
and
hold it until the roller sunblinds have moved
to the desired position.
or
X
Pull the switch on the rear overhead control
panel in the direction of arrow
1
and hold
it until the roller sunblinds have moved to
the desired position.
Resetting the panorama sliding sunroof
and the roller sunblinds
Reset the panorama sliding sunroof and the
roller sunblinds if the panorama sliding sun-
roof does not move smoothly, or if the battery
was disconnected or discharged.
X
Remove the fuse for the panorama sliding
sunroof in the main fuse box
(
Y
page 341).
X
Reinsert the fuse.
X
Make sure that the key is in position 2 in
the ignition lock.
X
Close the roller sunblinds fully.
X
Keep the switch pressed for an additional
second.
X
Open the roller sunblinds fully.
X
Keep the switch pressed for an additional
second.
X
Raise the panorama sliding sunroof fully.
X
Keep the switch pressed for an additional
second.
X
Close the panorama sliding sunroof fully.
X
Keep the switch pressed for an additional
second.
X
Check that the panorama sliding sunroof
can be opened fully again (
Y
page 183).
X
If this is not the case, consult a qualified
specialist workshop.
Controls
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 185
Z
Dateiname: 6515_3416_02_buchblock.pdf;
preflight
