Seats
82
Folding back the head restraints from
the front (Saloon)
1
Button for folding back the rear seat head
restraints
X
Make sure that the key is in position 2 in
the ignition lock.
X
Press button
1
.
Folding back the head restraints from
the rear (Estate)
1
Release catch
X
Press release catch
1
.
Adjusting the head restraint height
(Estate)
G
Risk of injury
Make sure that the central area of the head
restraint supports the back of your head at
about eye level. You could seriously injure
your neck if your head is not correctly sup-
ported by the head restraint in the event of
an accident. Never travel without a cor-
rectly adjusted and engaged head restraint.
1
Release catch
If the head restraint is fully inserted, it is nec-
essary to press release catch
1
.
X
To raise: pull the head restraint up to the
desired height.
X
To lower: press release catch
1
and push
the head restraint down until it is in the
desired position.
Adjusting the head restraint angle
(Estate)
Adjust the head restraint so that it is as close
as possible to your head.
You can engage the two outer head restraints
in two positions.
Controls
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 82
Dateiname: 6515_3416_02_buchblock.pdf;
preflight
