Flat tyre
317
X
Remove the key from the ignition lock.
X
Fold the wiper arm away from the rear win-
dow until it engages.
X
Turn wiper blade
1
at a right angle to wiper
arm.
X
Press tab
2
and push wiper blade
1
off
the retainer in the direction of arrow
4
.
X
Remove wiper blade
1
.
Fitting
X
Insert the new wiper blade into retainer
3
in the opposite direction to arrow
4
until tab
2
engages.
X
Make sure that wiper blade
1
is seated
correctly.
X
Turn wiper blade
1
parallel to the wiper
arm.
X
Fold the wiper arm back onto the rear win-
dow.
Flat tyre
Your vehicle may be equipped with:
R
a TIREFIT kit (
Y
page 255)
R
a "Minispare" emergency spare
wheel* (
Y
page 255)
R
a collapsible emergency spare
wheel* (
Y
page 255)
R
a spare wheel* (
Y
page 255)
R
the MOExtended run-flat sys-
tem* (
Y
page 328)
Preparing the vehicle
i
Vehicle preparation is not necessary on
vehicles with MOE tyres*.
X
Stop your vehicle as far away from traffic
as possible on solid, non-slippery, level
ground.
X
Switch on the hazard warning lamps.
X
Firmly depress the parking brake.
Vehicles with manual transmission
X
Shift to either first or reverse gear.
Vehicles with automatic transmission*
X
Move the selector lever to P.
For all vehicles
X
All occupants must get out of the vehicle.
Make sure that they are not endangered as
they do so.
X
Make sure that no one is near the danger
area whilst a wheel is being changed. Any-
one who is not directly assisting in the
wheel change should, for example, stand
behind the barrier.
X
Switch off the engine.
X
Remove the key from the ignition lock.
X
Place the warning triangle (
Y
page 252) or
warning lamps at a suitable distance.
Observe legal requirements.
G
Risk of injury
The jack is designed only to raise the vehi-
cle for a short time while a wheel is being
changed.
If you intend to work under the vehicle, it
must be placed on stands.
Practical advice
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 317
Z
Dateiname: 6515_3416_02_buchblock.pdf;
preflight
