Loading and stowing
195
ers
6
on front luggage compartment floor
1
.
i
You must release both retainers
6
to
remove transverse brace
4
. To do this,
press the tabs under retainer
6
forwards.
i
You can insert loading tray
2
under
either the rear or the front luggage com-
partment floor.
Vehicles with a folding bench seat*
TIREFIT, the vehicle tool kit, etc. are located
in the stowage well.
Opening the luggage compartment floor
1
Handle
2
Luggage compartment floor
X
Remove the seat cushion from the folding
bench seat (
Y
page 87).
X
Pull handle
1
and fold up luggage com-
partment floor
2
.
Closing the luggage compartment floor
X
Fold down luggage compartment floor
2
and press it down until it locks in place.
Retaining hooks in the boot (Saloon)
There is a hook on the upper edge of the boot,
on which you can hang items such as bags.
1
Tab
2
Hook
X
Pull down hook
2
by tab
1
.
Through-loading feature in the rear
bench seat* (Saloon)
The left-hand and right-hand rear seats can
be folded down to increase the boot capacity.
If you are transporting a long load, you can
remove the rear bench seat cushions
(
Y
page 197).
G
Risk of injury
Do not carry heavy or hard objects inside
the vehicle or in the boot unless they are
secured. Vehicle occupants could be
injured by objects being thrown around in
the vehicle in the event of:
R
sharp braking
R
a change of direction or
R
an accident
G
Risk of poisoning
Always drive with the boot lid closed.
Exhaust fumes could otherwise enter the
vehicle interior.
Folding the rear bench seat forwards
!
The seat cushion must always be released
and folded up before the backrest is folded
Controls
* optional
211_AKB; 2; 5, en-GB
mkalafa,
Version: 2.9.4
2008-02-29T16:57:07+01:00 - Seite 195
Z
Dateiname: 6515_3416_02_buchblock.pdf;
preflight
