Menzi Muck Menzi IHI 45v4, Operator'S Manual

Page: 102 / 147

MAINTENANCE
45V4 • 55V4 • 60V4 ENG 3-16
TRAVEL REDUCTION GEAR
Check Oil Level and Refilling
1. Stop the engine so that the filler port is located at the
upper position.
2. Place the container under the drain port.
3. Remove the level plug (1). If the oil surface reaches
the level part, the oil level is proper.
4. If oil is insufficient, remove the oil filler plug (2) and
refill oil up to the lower limit.
5. Clean the level plug and oil filler plug, then attach them.
Change Oil
1. Locate the drain port to the lower position and stop the
engine.
2. Place the container under the drain port.
3. Remove the filler plug and level plug.
4. Remove the drain plug (3) to discharge oil.
5. Clean the drain plug and attach it.
6. Fill oil through the filler port until oil flows out of the
level port.
7. Clean the filler plug and level plug, then attach them.
Specified oil Qty
Gear oil
API GL-4, SAE90
0.9 L
The gear case and oil are hot immediately after
stopping the engine. Wait until the temperature
lowers.
Oil level