Menzi Muck Menzi IHI 45v4, Operator'S Manual

Page: 40 / 147

OPERATION
45V4 • 55V4 • 60V4 ENG 2-8
6. Engine key switch
Use this switch to start and stop the engine.
HEAT (preheat)
Set the switch to this position to preheat the engine if
the engine is cold in cold seasons.
Keep the switch at the HEAT position for maximum 10
seconds. Preheating is complete and the glow
indicator turns off. Turn the key to the START position
to start the engine when the glow indicator turns off.
OFF (stop)
The key may be inserted and removed at this position.
Power of all electrical systems is cut off and the
engine stops.
ON (run)
Power is supplied to the electrical systems and the OK
monitor indicator turns on.
START (start)
Set the switch to this position to start the engine.
Release the fingers from the key immediately after the
engine starts.
The key returns to the ON position automatically.
7. Power outlet
This is a power socket for standby power source. Use it
within the following capacity.
Capacity: 12 V, 120 W
Always keep the cap closed when this socket is not used.
8. Light switch
Use this switch to turn on and off the front light of the
boom.
x
Turning on: Press the ON side of the switch.
x
Turning off: Press the OFF side of the switch.
9. Mode select switch
Change the operation mode
x
“ECO” Mode: This is a mode in which fuel consumption
is suppressed.
The ECO mode is started by putting the selector to the
ECO side.
x
“Vmax” Mode: This is a mode specialized to speed of
work.
The Vmax mode is started by putting the selector to
the Vmax side.
WC-C200200
WC-C200230
ECO mode Vmax mode
WC-C200190