Menzi Muck Menzi IHI 45v4, Operator'S Manual

Page: 125 / 147

MAINTENANCE
45V4 • 55V4 • 60V4 ENG 3-39
LONG TERM STORAGE
To protect the cylinder rod from rust, set the
machine to the posture for long term storage.
Before storage
x
Clean the machine.
x
Carry out lubrication, greasing and oil changing of each
part.
x
Apply grease to the exposed piston rods of the
hydraulic cylinders.
x
Dismount the batteries, recharge them fully, and store
them. Alternatively, disconnect the negative terminals.
During storage
If you have to operate the machine indoors to
prevent rust, keep good ventilation and gas
poisoning by window or entrance.
x
Warm up the machine and carry out traveling, swinging
and a series of operations, including attachment
operations, once every month to prevent rust and keep
lubrication condition while the machine is not used for
long.
x
Wipe off grease from the hydraulic cylinder before
moving the attachment.
After storage
x
Check the lubrication and greasing conditions of each
part and the coolant level.
x
Wipe off grease from the hydraulic cylinder.
x
Start the engine, warm it up, and carry out traveling,
swinging and attachment operations several times
repeatedly to run in each part.
Posture for long term storage