Menzi Muck Menzi IHI 45v4, Operator'S Manual

Page: 44 / 147

OPERATION
45V4 • 55V4 • 60V4 ENG 2-12
Operator's Seat
Sit on the operator's seat and adjust it to the condition
where the operation levers and pedals may be used
smoothly.
Back and forth adjustment:
Move the seat back and forth while pulling the slide lever
(1) to adjust the seat position.
Reclining adjustment:
Move the back seat (3) back and forth while pulling the
reclining lever (2) to adjust the back seat angle.
Suspension adjustment:
Adjust the hardness of suspension according to the body
weight with the suspension lever (4). The applicable body
weight is displayed in the display panel (5).
Lower the bucket onto the ground and stop the
engine before adjusting the operator's seat.
Seat belt
Hold the grip (1), insert the tongue plate (2) into the
buckle (3) to the end, and make sure that it is locked.
x
Fasten the seat belt during operating.
x
Be sure to check the belt, tongue plate, buckle,
etc. before starting operating. Replace the
damaged belt, tongue plate and/or buckle with
new one(s).
AUX Pedal (Option)
Use this for making the No. 1 AUX hydraulic operation.
Put the pedal lock lever in the unlock position.
Supply of pressure to the left side of the arm: Step on the
front side of the pedal.
Supply of pressure to the right side of the arm: Step on
the rear side of the pedal.
When the No. 1 AUX hydraulic operation is not to
be made, move the pedal lock lever to the lock
position and put it in a state in which it cannot be
operated.
Pedal lock lever
Arm
Left pipe pressure supply
Arm
Right pipe pressure supply
Lock
Unlock