Menzi Muck Menzi IHI 45v4, Operator'S Manual

Page: 66 / 147

OPERATION
45V4 • 55V4 • 60V4 ENG 2-34
High Speed Traveling
Push the travel speed select switch (1) of the blade lever
to change the travel speed into the high speed. Push it
again to change the high speed into the low speed.
Do not change the travel speed into the high speed
while unloading from a truck or traveling down a
slope. It is very dangerous if the travel speed
changes during traveling.
Precautions While Traveling on Slope
1. The gradeability of this machine is 30º (58%).
2. Travel up or down a slope at the low speed.
3. Travel up a 15º or more slope in the posture shown on
the right.
4. Reduce the engine speed and operate the travel levers
slowly when traveling down a 15º or more slope.
Move down the slope in the forward traveling posture
as shown on the right.
Lower the bucket onto the ground to stabilize the
machine if it becomes unstable.
x
Do not change the direction on a slope.
Otherwise, the machine may slide sideways.
x
When the machine moves across a slope, it
may slide sideways. Move down the slope onto
a flat ground, turn the machine, and travel
safely.
x
Do not travel on a 30º or more slope.
WC-C200670