22
COUPLING
1.
Move the tractor closer to the machine,
trying to align the tractor PTO with the
machine drive shaft as much as possible.
2.
Turn off the tractor and set the parking
brake.
3.
First, engage the lower left arm of the tractor
(A).Secure it with the pin and lock it with the
cotter pin.
4.
Then attach the lower right arm of the tractor
(B).Secure it with the pin and lock it with the
cotter pin.
5.
Lastly, engage the upper arm (C) third
point.Secure it with the pin and lock it with the
cotter pin.
Adjust the tractor outriggers, eliminating side
play.
4.9 - LEVELING
COUPLING
After coupling to the tractor, make sure
the machine is level in the rear and side
directions. Operate the hydraulic and lift the
machine about 15 cm from the ground. Then do
the checks below:
1. 50
86.286
.2 11
8. 08.0 2
~~
1
REAR LEVELING
Looking at the machine from behind,
make sure it is level. Make the necessary
adjustment by working on the tractor lift arm.
SIDE LEVELING
Looking sideways at the machine, make
sure it is level. Make the necessary adjustment
by working on the third point of the tractor.
