28
Operating Instructions - CPC4000
Industrial Pressure Controller
CPC4000
6.4 Applications
6.4.1 Home Application
The Home App is the normal operation screen. This application is different from the others in
that it is not used to setup the configuration but is used to monitor the pressure applied to the
installed transducers and the device under test through the measure / control port.
The screen in figure 6.4.1-A shows the basic Home App in an instrument. The user can change the
display to show multiple auxiliary displays by pressing the auxiliary button on the left corner of the screen
(figure 6.4.1-B). The Units button is always displayed. When the Units button is pressed a selection of
imperial and metric units will be displayed on the right (figure 6.4.1-C); notice that the Units button has a
lighter background when the selection menu is active. If a barometric reference is installed, the Mode but-
ton, described below, will toggle from Gauge to Absolute mode when pressed.
Figure 6.4.1-A – Basic Home App
Figure 6.4.1-B – Single Channel Display
Figure 6.4.1-C – Pressure Units
