Operating Instructions - CPC3050
25
High-Speed Pressure Controller
CPC3050
6 Local Operation and Setup
6.1 General Operation
This section describes the procedures for operating the CPC3050 from the front panel. Instructions for
operating the device remotely from an external computer are covered in Section 7, Remote Operation. By
following the procedures provided in these two sections and Section 10, Calibration, you can expect your
CPC3050 to deliver maximum accuracy and dependability for many years of useful service.
6.1.1 Setup Applications
Configuration of the CPC3050 is achieved by changing settings accessed through the Application (“App”)
buttons. Local operation is accomplished by observing the data presented in the display. The appearance
and functionality of the display can be changed by pressing the App button for the related function. After
an app has been chosen, a set of related parameters will appear. After choosing one of these param-
eters, a set of selections related to that parameter will appear or a data entry keypad.
The desired selection or data can be entered here.
6.1.2 Display Screen Features
The screen shown below provides an overview of the features shown on the display after initialization.
The left three fourths of the display contains the area where information is displayed (in this case the
Home Application) and the right one fourth contains the selection icons for each application. A tare but-
ton, bar graph and auxiliary displays (Peak, Rate, Uncertainty, Units, Temperature or Barometer) will
appear in the Home App if activated. All of the CPC3050 screen features are described in more detail
throughout this manual. The active App is represented in a lighter gray color as compared to the other
Apps.
Operating Screen
Settings Apps
Active transducer
range
Current Value
Optional Bar graph
Units / Pressure Type
Auxiliary Displays
Operating Modes
{
Figure 6.1.2 – Display Screen Features
