Chassis Installation
Rev A04
Mellanox Technologies
48
•
Make sure that you are using the right bracket for the right rail (right side when facing the
front of the rack) and the left bracket for the left rail (left side when facing the front of the
rack); see Figure 22.
•
The rail supports six or eight 8-32 5/8" screws; eight is recommended.
Figure 22: Positioning the Insert In Front of the Right Bracket
Figure 23: Assembling an Insert to a Rail Bracket (Inside View)
3. Choose the threaded holes in the bracket.
4. Assemble the rail with flat washers, spring washers, and nuts, but do not tighten the screws
yet.
