![background image](http://html1.mh-extra.com/html/meler/cantho/cantho_instruction-manual_1767116039.webp)
5-1
MAINTENANCE
MA-5168-ENG
ADHESIVE MELTER CANTHO
5. MAINTENANCE
Warning
: The melter/applicator equipment is equipped with current
technology, but has certain foreseeable risks. Therefore, only allow qualified
personnel with enough training and experience to operate install or repair this
equipment.
The following table briefly summarizes the indications for adequate melter/
applicator equipment maintenance. Always read the corresponding section
carefully.
If the equipment does not work or works incorrectly, called to your Meler
Representative or to the Main Office.
Equipment cleaning
To continue to take advantage of the melter/applicator’s benefits and to
ensure the perfect mobility of its components, it is necessary to keep all its
parts clean, especially the ventilation grates on the of the machine.
Warning:
Risk of electric shock. Carelessness may result in injury or death.
Clean the exterior using a cloth moistened with water. Do not use flammable
liquids or solvents.
External cleaning:
• Use cleaning products compatible with painted surfaces.
• Apply the cleaning product with a soft cloth.
• Do not use sharp tools or scrapers with sharp edges.
Operation
Frecuency
Refer to
External cleaning of cas-ibg
- Daily
Equipment cleaning
Cleaning the tank
- Presence of burnt adhesive
- Each time the adhesive is changed
Cleaning tank
Cleaning the grille
- Presence of burnt adhesive
- Each time the adhesive is changed
Filter maintenance
Cleaning the tube for the block
- Presence of burnt adhesive
- Each time the adhesive is changed
Cleaning the tube for the block
Cleaning the pusher piston
- Presence of burnt adhesive
- Each time the adhesive is changed
Cleaning the pusher piston
Activation of the thermostat
- When it has been desactivated due to excess
temperature
Thermostas maintenance
Removal of the unit
- Replacing the equipment or repairs
Removing the equipment from
its base
Summary of Contents for Cantho
