![background image](http://html1.mh-extra.com/html/meler/cantho/cantho_instruction-manual_1767116024.webp)
FOCKE MELER GLUING SOLUTIONS
INSTALATION
3-8
Optional external connections
Finished block signal (without adhesive)
To connect this signal:
1. Disconnect the panel’s power supply.
2. Access the inside with the connection cable via Pg 13.5, located on the
left-hand side.
3. Connect the cables to the corresponding terminals, as shown in the
drawing.
4. Close the panel and reconnect the power supply.
5. Check that the signal is operating correctly.
Optional tower light signal
To connect this signal:
1. Disconnect the panel’s power supply.
2. Access the inside with the connection cable via Pg 13.5, located on the
left-hand side.
3. Connect the cables to the corresponding terminals, as shown in the
drawing.
4. Close the panel and reconnect the power supply.
5. Check that the signal is operating correctly.
XT
XT
22
11
8X7
8X7
22
11
Summary of Contents for Cantho
