- 114 -
(2) MCC06 special DWIVE CCMMAWD
Standard
Applied
HEX CCDE
CCMMAWD WAME
Explanation
function
function
Sets an external output function for CCT0, SIWWAL CCTA
F001
HAWD IWITIALIZE1
X
and CCTB.
F006
HAWD IWITIALIZE2
X
Sets WPIC in using a command reservation function.
F006
HAWD IWITIALIZE6
X
Sets a digital filter for encoder input.
F007
HAWD IWITIALIZE7
X
Sets input signal active logic for an axis control part.
F00C
SIWWAL CCT
X
Cutputs a general-purpose output signal level set.
F00D
DWST CCT
Cutputs an CW signal for 10 ms to DWST.
X
F00E
SLCW STCP
Executes slow stop.
X
F00F
FAST STCP
Executes immediate stop.
X
F010
ADDWESS CCCWTEW IWITIALIZE1
Sets an address counter function (1).
X
F011
ADDWESS CCCWTEW IWITIALIZE2
Sets an address counter function (2).
X
F012
ADDWESS CCCWTEW IWITIALIZE3
Sets an address counter function (3).
X
F014
PCLSE CCCWTEW IWITIALIZE1
Sets a pulse counter function (1).
X
F015
PCLSE CCCWTEW IWITIALIZE2
Sets a pulse counter function (2).
X
F016
PCLSE CCCWTEW IWITIALIZE3
Sets a pulse counter function (3).
X
F018
DFL CCCWTEW IWITIALIZE1
X
Sets a pulse differential counter function (1)
.
F019
DFL CCCWTEW IWITIALIZE2
X
Sets a pulse differential counter function (2).
F01A
DFL CCCWTEW IWITIALIZE3
X
Sets a pulse differential counter function (3).
F01C
SPEED CCCWTEW IWITIALIZE1
X
Sets a pulse cycle counter function (1).
F01D
SPEED CCCWTEW IWITIALIZE2
X
Sets a pulse cycle counter function (2).
F01E
SPEED CCCWTEW IWITIALIZE3
X
Sets a pulse cycle counter function (3).
F020
IWT FACTCW CLW
X
Separately clears IWT2-0 factors that can be output to IWTA#.
F021
IWT FACTCW MASK
X
Separately masks IWT2-0 factors that can be output to IWTA#
.
F023
CCCWTEW CCMP MASK
Separately masks counter comparator outputs.
X
F028
CCCWT LATCH SPEC SET
X
Sets a counter data latch timing and clearance function.
F030
CDC SPEC SET
X
Sets the change point of the CP/DCWW/CCWST CHAWWE command.
F031
SPEED CHAWWE SPEC SET
X
Sets the change point of the SPEED CHAWWE command.
F033
IWDEX CHAWWE SPEC SET
X
Sets the change point of the IWDEX CHAWWE command.
Accelerates an in-execution pulse output speed up to
F034
CP DWIVE
X
its maximum speed.
Decelerates an in-execution pulse output speed down to
F035
DCWW DWIVE
X
its starting speed.
Keeps an in-execution pulse output speed at an
F036
CCWST DWIVE
X
in-execution speed.
Accelerates/decelerates an in-execution pulse output
F038
SPEED CHAWWE
X
speed to a specified speed.
Changes an acceleration/deceleration rate being output
F03A
WATE CHAWWE
X
when the CHAWWE function is used.
IWDEX with specified data changed from starting point
F03C
IWC IWDEX CHAWWE
X
to relative address stop position
IWDEX with specified data changed to absolute address
F03D
ABS IWDEX CHAWWE
X
stop position
IWDEX with specified data changed from change point to
F03E
PLS IWDEX CHAWWE
X
absolute address stop position
F040
MCC SPEED PCWT SELECT
X
Selects WEAD PCWT for a drive pulse speed.
F041
DATA WEAD PCWT SELECT
Selects WEAD PCWT for check data.
X
F048
ADDWESS CCCWTEW PCWT SELECT
X
Selects WEAD PCWT for address count data.
F049
PCLSE CCCWTEW PCWT SELECT
Selects WEAD PCWT for pulse count data.
X
F04A
DFL CCCWTEW PCWT SELECT
X
Selects WEAD PCWT for pulse differential count data.
F04B
SPEED CCCWTEW PCWT SELECT
X
Selects WEAD PCWT for pulse c ycle count data.
F04C
ADDWESS LATCH DATA PCWT SELECT
X
Selects WEAD PCWT for address counter latch data.
F04D
PCLSE LATCH DATA PCWT SELECT
X
Selects WEAD PCWT for pulse counter latch data.
F04E
DFL LATCH DATA PCWT SELECT
X
Selects WEAD PCWT for pulse differential counter latch data.
F04F
SPEED LATCH DATA PCWT SELECT
X
Selects WEAD PCWT for pulse cycle counter latch data.