Operating instructions
Turning the system ON and OFF
Press the [SELECT] button to switch between modes:
“Automatic”
Heating will start and stop automatically depending on snow
detection by the snow sensor/sensors.
“Manual ON”
Heating will start regardless of snow sensor measurements and will
stop after a preset time (pls. refer to the “Manual ON” section in the
technician settings P05).
Note: Mode will always return to “Automatic” after switching the unit OFF and ON.
Press and hold the [ON] button for 0.5 seconds to turn the system ON or OFF.
The words “ON” or “OFF” will appear on display.
Selecting Automatic or Manual mode
Selecting temperature scale
Press the [+] button for Celsius.
Press the [-] button for Fahrenheit.
Tel: (856) 2882882
Tel: +972-3-9626462
Fax: +972-3-9626620
support@meitavtec
.
com
PYROCON19
Owner’s manual & Technician Settings
Pg. 6
Heaters indication
Heater ON
Heater OFF
The number beneath the heater icon
indicates the heater outputs (1 to 5).
Heater
1
Heater
2
Heater
3
Heater
4
Heater
5
Black icon – Heater ON
White icon – Heater OFF
A solid snow flake icon will appear on display while sensing snow and during normal
heaters operation.
Snow flake icon and digital time indication
A blinking snow flake icon will appear on display during heaters off delay or when manual mode is
activated. The digital clock will count down the remaining time until the heaters are turned off.
The snow flake icon will disappear from display as long as the heaters are turned off.
Heater ON in off delay time
(see technician parameter P04)
