Introduction
The PYROCON19 offers smart and easy control over the PYRO Snow & Ice Melting system.
It can operate up to 4 snow melting zones and one auxiliary zone, with selectable sequencing method.
Typical applications include driveways, sidewalks, loading docks, stairs, pavements and gutters.
The backlit LCD screen provides full interface and information to the system status.
The Use of several zones staggering allow covering larger area for snow melting with less available
electrical power.
The PYROCON19 offers various operating and programming options such as:
- Switchable temperature scales (°F or °C)
- Adjustable Lower ambient temperature limit to stop
- Both Automatic and Manual modes
heaters (lockout)
- Adjustable heaters cycle and splitting times
- Energy saving temperature limit
- Adjustable heaters hold on off delay
- Adjustable snow sensor sensitivity
- Optional auxiliary control based 3
rd
party
- Commissioning/Test environment
snow sensor (e.g. Gutter/Pavement sensor)
- Master/Slave connections
Tel: (856) 2882882
Tel: +972-3-9626462
Fax: +972-3-9626620
support@meitavtec
.
com
PYROCON19
Owner’s manual & Technician Settings
Pg. 3
Optional 3
rd
party sensor
(e.g. Gutter/Pavement sensor)
Optional PYROSENSE
(Up to 4 Aerial sensors)
(Do not run communication cables close
to heaters or high voltage wires)
Zone
1
General system layout
Zone
5
Zone
2
Zone
3
Zone
4
Auxiliary control
(e.g. Gutter or
Pavement
heaters)
Optional PYROSENSE-GUTTER
(up to 2 Gutter sensors)
Optional T2 –
Outdoor temperature sensor
BMS (Bacnet/Modbus)
or WiFi module
Optional PYROSENSE-GROUND
(Up to 2 Ground sensors)
PY
RO
-J
B
O
X
ON
PYROCON19
Optional PYROULS –
Upper limit sensor
Co
nta
ct
ors
