www.megger.com
PAT400 Series
67
11.3.5 Deleting accounts
1)
From the HOME screen use the arrow keys to select the “Manage Users” option from the USERS tab. If the “Manage Users”
option is not available the account does not has “Supervisor” status.
2)
Press the Delete
Hotkey. The Delete User screen will be displayed with the current account displayed in the Username field.
3)
If this is the account to be deleted, press the Delete
Hotkey.
Or
Press the OK key to display a list of accounts and use the DOWN/UP arrow keys to highlight the require account and press OK.
4)
Press the Delete Hotkey to delete the account.
5)
The Warning message will be displayed. Press OK to confirm or Esc to abort.
Notes: Deleting an account whilst logged into the same account will log the operator out of the PAT tester.
11.4
Recovery Login
If it is not possible to log into an account, the operator has two options:
As a “Supervisor”, a new account can be added, or the account deleted and replaced by a new one with the same Username, as in
section 11.3.5 and 11.3.4 respectively.
Alternatively a user can reset the accounts in the PAT400 using the Recovery Login procedure as below.
As a “User”, it is only possible to reset the PT400 to a single “Supervisor” account with PIN, as below:
1)
Remover power from the PAT400
2)
Reconnect power and hold down the TEST button.
3)
After 20 seconds the PAT400 will display :
