www.megger.com
PAT400 Series
51
10.1.3 Changing Clients
To change between different Clients in the PAT400:
1)
From the SETUP tab press the SELECT CLIENT
Hotkey.
2)
Press the OK key to open the drop down list. Select the desired Client and press OK.
3)
Press the SAVE
Hotkey to store the change.
4)
The display will now change to the SELECT LOCATION screen.
Select the appropriate Location from the drop down list.
5)
Press OK to accept the new location.
6)
Press the SAVE
Hotkey to store the change.
10.2 Locations
Multiple locations can be added to one CLIENT, up to a maximum of 2 000*. To add a LOCATION, select the LOCATION option from the
SETUP menu. Follow the same process as adding Clients in Section 10.1.
* Firmware revisions earlier than 2.2 were limited to 50 locations per Client.
10.2.1 Adding Locations
1)
Select LOCATION from the SETUP menu and press OK.
The Location screen will be displayed with the Add, Edit and Delete Location Hotkeys as below:
2)
Select the ADD
Hotkey to add a new Location to the current Client.
3)
Complete the text fields with the necessary Location information. Only the Location name is mandatory.
