www.megger.com
PAT400 Series
46
8.4
Deleting a test group
To delete a test group:
1)
From the HOME screen use the RIGHT ARROW key to select the SETUP tab.
2)
Press the TEST GROUP MANAGER
Hotkey.
3)
Press the DELETE
Hotkey.
4)
Press OK to activate the drop down list. Select the required test group then press OK.
5)
Press the DELETE
Hotkey.
6)
The display will ask for confirmation that the test group is to be deleted.
7)
Press OK to accept, Esc to exit.
Note: A test group cannot be deleted whilst there are assets in the database that are using that test group.
8.5
Repeated Tests
It is possible to create test groups with repeated Bond, Continuity, Insulation and Flash tests.
An example screen is shown below.
Repeated tests are setup by choosing an option in the Cycles column. Bond and Continuity test have the ability to be repeated a set
number of times (1 to 10) or repeated indefinably by choosing the ∞ symbol.
For example you may wish to test a multi way extension lead which has 4 sockets. In this case you would set the Bond Cycles option to
4, this will automatically perform 4 Bond test and record the worst Bond resistance.
An example screen is shown below:
Delete
