www.megger.com
PAT400 Series
25
3.5
Short circuit assets
Some assets may appear to the PAT400 to be short circuit. This can be caused by large inductive loads.
In such cases, the following warning message will be displayed:
Warning: Asset may be short circuit.
Press TEST to continue, ESC to abort
Only if the operator is certain the equipment is not a short circuit, press TEST, otherwise press Esc to abort the test
3.6
Aborting a test
All tests can be aborted at any time by pressing the TEST button or Esc (escape) button.
3.7
Completion of testing
On completion of testing all test fields should turn green as below. The test results are displayed in the centre column with the pass limits
for that test group on the right.
On completion of testing, the following options are available:
Re-test asset using current test group. Warning: test data will not be saved for the previous test.
Repair codes – Allows repair details to be added to asset test results – See section 3.10 below.
Save the test results to memory and print a barcode label (a Megger USB barcode printer must be connected prior
to requesting this function).
Save test results to memory and return to the initial screen.
Go to Section 4 to learn about using the memory, or Section 4.2 Saving a test result to memory.
To return to the HOME screen without saving the results press HOME button
SAVE results to memory
Print bar code label & SAVE
results to memory
Repair codes
Repeat test sequence
