3 0
S e t t i n g s > M o t i o n D e t e c t i o n
M o n i t o r a n d c o n f i g u r e t h e M E G A p i x ® c a m e r a t h r o u g h a b u i l t - i n w e b
v i e w e r .
Overview
To setup a motion detection mask on the camera’s view, click on any point in the camera’s preview
and drag to make a detection range. once a motion detection mask is set, a red mark will appear
on the upper bar of the video image on the web monitoring page. The camera supports four (4)
different motion detection masks. Each one can be setup individually be selecting the appropriate
tab (ROI#1~4 tab).
1. Fill All – If enabled, the entire camera’s FoV will be set to motion detection.
2. Clear All – Deselects the selected area.
3. Invert – Inverts the selected area.
4. Enable – Check the box for the
activation.
5. Sensitivity – The higher the value,
the more sensitive to motion the
area will be.
6. Threshold – When the ratio of the
moving parts to the whole image
is on the range, the detection is
checked.
7. Click OK to apply any changes to
the settings.
WEBVIEWER*
Motion Detect
Summary of Contents for PANO DWC-PF5M1TIR
Page 5: ...PARTS DESCRIPTIONS 5 ...
Page 6: ...DIMENSIONS MM 6 43 8 1 72 ...
Page 7: ...INCLUDED IN THE BOX 7 ...
