24
OPERATING INSTRUCTIONS
WARNING
Do not store spare LP Gas cylinders under or near this appliance.
Never fill the cylinder beyond 80 percent capacity.
If the information in item 1&2 is not followed exactly, a fire causing death or serious injury may occur.
OPERATING INSTRUCTIONS
LIGHTING THE GRILL
Place the legs in up position.
Make sure the LP Gas cylinder is tightly treaded into the regulator (hand tighten only).
Open lid. Always open lid when lighting.
Push and turn Main burner knob slowly to IGNITE/HIGH as show in Fig. 8 burner should light immediately.
If ignition does not occur in 3-5 seconds, turn the control knob “OFF.” Wait 5 minutes before attempting
to re-light the grill. If the grill fails to ignite after the second attempt, call customer service at
(+27) 12 802 1515 for assistance. With burner lit, gently close the lid and allow the grill to Warm up for
20-30 minutes prior to use.
Note: If the knob can’t spark, insert the match into the lighting rod as show in Fig.9. Ignite the match
and insert though the cooking grids to the burner.
1.
2.
3.
4.
5.
1.
2.
3.
•
•
•
Main Burners
Fig. 8
Off
Ignite/
High
Fig. 9
TURNING THE GRILL OFF
Turn knob to “OFF” position.
Turn the LP Gas cylinder control knob to the “OFF” position.
Caution: Do not attempt to re-light the grill without following all the
lighting instructions.
Allow the grill body to cool at least 30 minutes before attempting to
move or transport.
Summary of Contents for 200 Fusion
