P3V Veterinary Digital Ultrasonic Diagnostic Imaging System User Manual
- 60
-
Chapter 6 Operation
6.1. Entering New Patient
Press
New Patient
to clear all the information displayed on the screen, and then begin a new
patient examination.
NOTE:
When you press
New Patient
, the system clears all the recent patient data, comments,
measurements, calculations and worksheets, except saved images.
6.2. Entering or Editing Patient Information
Press
Patient Info.
to activate the patient data annotation function, and then enter or edit the
patient data, as shown below:
Figure 6-1 Patient Data Input Dialog Box
To close the input text box, press
Enter
;
To switch the input text box: press
Tab
;
To enter the patient information, use the keyboard;
To exit: select
OK
or
Cancel
, and then press
Enter
or
Set
.
6.3. Selecting an Examination Type
Press
Exam
to select an examination type. You can change the examination type at any time by
making a selection from the Exam Type menu list, as shown below.
Roll the trackball to highlight
an examination type and press
Set
to select.
