P3V Veterinary Digital Ultrasonic Diagnostic Imaging System User Manual
- 64
-
5.
Roll the trackball and press
Set
to begin a new distance measurement.
You can measure a maximum of four groups of data. The outcome
will be displayed in the measurement result window, as shown below.
6.
Press
Measure
to finish and exit.
Dist1
Figure 6-4 Distance Measurement and the Results
Circumference/Area
Ellipse Method
To measure Circumference / Area:
1.
Press
Measure
to activate measurement function.
2.
Roll the trackball to highlight
Cir/Area
. Then select
Ellipse
, and
press
Set
to activate a measurement cursor “+” on the screen.
3.
Roll the trackball and press
Set
to anchor the start point of fixed
axis of ellipse.
4.
Roll the trackball and press
Set
to anchor the end point of fixed
axis of ellipse.
5.
Roll the trackball, and press
Set
to define the size of the ellipse.
6.
Roll the trackball and press
Set
to begin a new
circumference/area measurement. You can measure a maximum
of four groups of data. The outcome will be displayed in the
measurement result window, as shown below.
7.
Press
Measure
to finish and exit.
Ellipse1
LAxis
SAis
Circ
Area
Figure 6-5 Ellipse Circumference/Area Method and the Results
