Installing the device in your car
20
− Lift the headrest off its leg supports. Align the horizontal support with the
headrest leg slots and ensure the horizontal support rests securely on the top of
the car seat. Reach the headrest.
− Remove the headrest and reinsert the headrest as shown with the headrest
attachment in between.
− Adjust the angle of the DVD unit, then secure by tightening the bolt on the right.
− To remove the DVD from the horizontal support bar, support the DVD unit with
one hand. With the other hand, fi rmly squeeze the release buttons either side of
the angled support and pull.
MD 43506 AUS Content MSN 5006 0041 Final Rev3.indd 20
MD 43506 AUS Content MSN 5006 0041 Final Rev3.indd 20
03.07.2018 10:33:53
03.07.2018 10:33:53
