+49 8142 448 460
[email protected]
www.medingmbh.com
30 von 36
medin Medical Innovations GmbH
Adam-Geisler-Str. 1
D-82140 Olching
OP_medinSINDI EN
Rev 14 Stand 30.10.2017
9. Electromagnetic compatibility
The information in this section is provided in order to enable the operator of the medinSINDI
®
to decide
whether the medinSINDI
®
is suitable for its electromagnetic environment.
Attention:
-
The medinSINDI
®
is a medical electrical device. Consequently, in order to guarantee the function of
the medinSINDI
®
precautions with regard to electromagnetic compatibility must be taken and the
medinSINDI
®
must be set up and used in accordance with the conditions set out below.
-
Portable or mobile RF communications equipment (e.g. mobile phones) can affect the medinSINDI
®
and must therefore not be used near the medinSINDI
®
. The minimum separation distance required
must be calculated in accordance with chapter 0 on the basis of the transmission frequency.
9.1
Electromagnetic transmission
Guidance and manufacturer’s declaration - electromagnetic emissions
The medinSINDI
®
is intended for use in the electromagnetic environment specified below. The customer or user of
the medinSINDI
®
, or the organisation responsible, should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions, CISPR11
Group 1
The medinSINDI
®
uses RF energy only for its internal
function. Therefore, its RF emissions are very low and
not likely to cause any interference in nearby
electronic equipment.
RF emissions, CISPR11
Class B
The medinSINDI
®
is suitable for use in all
establishments, including domestic establishments
and those directly connected to the public low-
voltage supply network that supplies buildings used
for domestic purposes.
Harmonic emissions, IEC 61000-
3-2
Class A
Voltage fluctuations/flicker
emissions, IEC 61000-3-3
Complies
