Medin medinSINDI 1080, Operating, Cleaning And Maintenance Instructions

Page: 10 / 36


+49 8142 448 460
info@medingmbh.com
www.medingmbh.com
10 von 36
medin Medical Innovations GmbH
Adam-Geisler-Str. 1
D-82140 Olching
OP_medinSINDI EN
Rev 14 Stand 30.10.2017
2.7. Dimensions and Weight
- Dimensions (height x width x depth):
180 x 240 x 145 mm (without connections and holder)
- Weight: 2.6 kg (without holder)
2.8. Overview of the General Technical Description

Information on these points can be found in the chapters indicated:

Conditions for use, transport and storage: see chapter 3.7

Characteristics and accuracies of the device: see chapter 2

Information on the installation of the device: see chapter 3

Description of the supply gases required: see chapter 3.3

Description of the power supply: see chapter 3.4

The device is disconnected from the mains by pulling the power supply unit cable of the
medinSINDI
® out of the electrical outlet. Thus when installing the medinSINDI ® , it should be
ensured that this plug is always freely accessible and can be disconnected from the mains without
difficulty. The medinSINDI
®
does not contain any switch which disconnects it from the mains.

Changes and modifications to the medinSINDI
®
are not permitted without the permission of the
manufacturer: see chapter 6.4

Repairs and an exchange of parts may only be made by trained, professional service personnel and
only in accordance with the instructions in the Maintenance Manual, observing warnings in the
manual and in these instructions for use: see chapter 6.3

The medinSINDI ® and its power supply unit are not suitable for use in the direct vicinity of the
patient. Only the patient tubes, the Medijet ® and the masks and prongs used are used in the direct
vicinity of the patient.
2.9. Accessories for medin medinSINDI
®
REF 1080
REF Description
Optional NIST connection
2020/2030 Air and oxygen supply tubes DISS
2020/2030_NIST (alternative to DISS) Connection gas supply air and oxygen NIST
2120/2130 Connection gas supply air and oxygen, DIN DISS
2120/2130_NIST (alternative to DISS) Connection gas supply air and oxygen, DIN NIST
2220/2230 Connection gas supply air and oxygen AGA DISS
2220/2230_NIST (alternative to DISS) Connection gas supply air and oxygen AGA NIST
2320/2330 Connection gas supply air and oxygen Parcodex DISS
2320/2330_NIST (alternative to DISS) Connection gas supply air and oxygen Parcodex NIST
5002 Mounting rail for rolling cart
5001 Rolling cart
MFL16 O
2
cell (unleaded)
FW7555/24 Power supply unit
51091 Flow outlet converter (ID F15mm, OD M22mm)
1244-3DW Tapered outlet adapter (from 4 to 8 mm tube ID)
11810 Conversion kit for central control/ nurse alarm
SMPV Push-Bag for manual ventilation
Table 1: Accessories for medinSINDI ®
3. Unpacking and Set-Up
3.1. Mounting and Setting Up the Parts
- Remove device and equipment from the packaging